Description
The Actisense opto isolator design integrates an over-moulded case for excellent water resistance and a small footprint for installation into tight spaces.
FEATURES
- One RS422 OPTO-isolated input
- One RS422 (NMEA 0183) output
- Up to 115200 baud
- Port powered
- Shielded cable and case
BENEFITS
- Protects PC input/receiver from damage
- Water resistant cable.
- Ruggedized over-moulded case suitable for harsh environment
- Quick and easy to install
Ordering Information
(Part number/s)
- OPTO-4
When isolation is required in both directions and/or the PC doesn’t have an RS232 port, the Actisense USG-2 offers bi-directional isolation in a USB to RS422 (NMEA 0183) form.
Use Case
Older marine PC’s and certain NMEA 0183 instruments utilise a DB9 connection rather than a USB or differential RS-422 Port. The OPTO-4 can be used here to transfer NMEA 0183 data without having to worry about ground loops thanks to the opto-isolation technology. The OPTO is also powered from the RS-232 / serial port on a PC, making installation even easier.
Tech Specs
| Electrical | |
| NMEA Listener / Input Isolation | 2kV Opto-Isolation between Red / Black NMEA Input Pair and all other Connections |
| NMEA Listener / Input Voltage | +/-15V Continuous Maximum +/-35V Max < 1 Second |
| NMEA Listener / Input Signal Thresholds | Logic ‘0’ +2V to +15V, Logic ‘1’-15V to 0V |
| NMEA Talker / Output Voltage & Current | Dependant on Host RS232 Interface. Typically +/-5V to +/-15V @ 10mA Max |
| RS232 Voltage on Host | +/-7V to +/-15V |
| RS232 Port Total Current Consumption | 2mA to 5mA depending on RS232 Voltage |
| Speed / Baud Rate
|
4800 to 115200 Baud
|
| Mechanical | |
| Housing Material | PVC Black |
| Thumb Screw Material | PVC Orange |
| Screw | Steel, Nickel Plated, M2.8 Thread |
| DB9 Connector | 9 Pin Female |
| Cable Length | 1.5m |
| Cable Wire | 22AWG (17/34AWG) Tinned Stranded Copper |
| Cable Jacket | PVC |
| Shield | Internal Copper Foil Shield |
| Cable Outer Diameter
|
5.5mm
|
| Approvals and Certifications | |
| Operating Temperature | -20°C to +70°C |
| Electrical Specification | Meets IEC 61162-2 |
| Weight | 100g |
| Guarantee | 3 Years |
| UL Certification | Cable E137250 |
| RoHS Compliant | |
Geek Mode
- One RS422 OPTO-isolated input to protect your PC from ground loop damage
- One RS422 (NMEA 0183) output
- Up to 115200 baud
- Powered via PC serial port for simple installation
- Shielded cable and case make it suitable for electrically noisy environments
NETWORK DIAGRAM
Description
The Actisense opto isolator design integrates an over-moulded case for excellent water resistance and a small footprint for installation into tight spaces.
FEATURES
- One RS422 OPTO-isolated input
- One RS422 (NMEA 0183) output
- Up to 115200 baud
- Port powered
- Shielded cable and case
BENEFITS
- Protects PC input/receiver from damage
- Water resistant cable.
- Ruggedized over-moulded case suitable for harsh environment
- Quick and easy to install
Ordering Information
(Part number/s)
- OPTO-4
When isolation is required in both directions and/or the PC doesn’t have an RS232 port, the Actisense USG-2 offers bi-directional isolation in a USB to RS422 (NMEA 0183) form.
Use Case
Older marine PC’s and certain NMEA 0183 instruments utilise a DB9 connection rather than a USB or differential RS-422 Port. The OPTO-4 can be used here to transfer NMEA 0183 data without having to worry about ground loops thanks to the opto-isolation technology. The OPTO is also powered from the RS-232 / serial port on a PC, making installation even easier.
Tech Specs
| Electrical | |
| NMEA Listener / Input Isolation | 2kV Opto-Isolation between Red / Black NMEA Input Pair and all other Connections |
| NMEA Listener / Input Voltage | +/-15V Continuous Maximum +/-35V Max < 1 Second |
| NMEA Listener / Input Signal Thresholds | Logic ‘0’ +2V to +15V, Logic ‘1’-15V to 0V |
| NMEA Talker / Output Voltage & Current | Dependant on Host RS232 Interface. Typically +/-5V to +/-15V @ 10mA Max |
| RS232 Voltage on Host | +/-7V to +/-15V |
| RS232 Port Total Current Consumption | 2mA to 5mA depending on RS232 Voltage |
| Speed / Baud Rate
|
4800 to 115200 Baud
|
| Mechanical | |
| Housing Material | PVC Black |
| Thumb Screw Material | PVC Orange |
| Screw | Steel, Nickel Plated, M2.8 Thread |
| DB9 Connector | 9 Pin Female |
| Cable Length | 1.5m |
| Cable Wire | 22AWG (17/34AWG) Tinned Stranded Copper |
| Cable Jacket | PVC |
| Shield | Internal Copper Foil Shield |
| Cable Outer Diameter
|
5.5mm
|
| Approvals and Certifications | |
| Operating Temperature | -20°C to +70°C |
| Electrical Specification | Meets IEC 61162-2 |
| Weight | 100g |
| Guarantee | 3 Years |
| UL Certification | Cable E137250 |
| RoHS Compliant | |
Geek Mode
- One RS422 OPTO-isolated input to protect your PC from ground loop damage
- One RS422 (NMEA 0183) output
- Up to 115200 baud
- Powered via PC serial port for simple installation
- Shielded cable and case make it suitable for electrically noisy environments
NETWORK DIAGRAM
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
