Rongsheng RSYD-A2 Life Vest Light
The RSYD-A2 water activated lifejacket light is an emergency position indicators. Power is lithium battery and LED as light source. It can be fixed on a variety of life jackets to indicate the location of the person who drop into water. When the water flow switch of the lifejacket light touches water, light will turn on automatically and flash continuously, indicate the location of the person who drop into water to improve the success rate of rescue. The light also has a manual close button allows it to be turned off manually.
The product has the advantages of small volume, light weight, long illumination time,good stability,and easy to install etc.
PRODUCT PERFORMANCE PARAMETER
There were no signs of damage after ten cycles at -30℃ and +65℃ ambient temperature, such as shrinkage, cracking, swelling, decomposition or changes in mechanical properties. It can be used normally at an ambient temperature of -30℃ to +65℃.
PRODUCT TECHNICAL STANDARD
SOLAS 1974 and Amendments, Chapter III, Articles 4, 7, 22, 26, 32 and 34, MSC.48(66) amended by MSC.207(81)), LSA Chapters I and II, MSC.81(70) amended by MSC.200(80), MSC.226(82), and MSC.323(89), part 1, section 10.
OPERATION
When the water flow switch of the lifejacket light touches water,light will turn on automatically and flashes 50-70 times/min.
MAINTENANCE
(1) Do not touch the switch with hands or other wet objects during storage to avoid accidental activation,air humidity and water vapor will not activate the light.Don't worry about the light activate accidentally so as long as it is stored properly.
(2) Check whether the appearance of the light is damaged,if there is a feature affects its function, it should be judged if a new product need to be replaced.
(3) Immerse the light into water,it should turn on automatically.Light should be closed normally by pressing the manual switch.After test, please also dry the water flow switch,and light will not turn on by pressing the manual switch.If the water flow switch does not be dried,light will still turn on.Please dry it in this case.Test qualified,the water activated lifejacket light is regard as in a valid normal state.
VALIDITY: 5 years
PACKING SPECIFICATION: 200pcs/Carton Volume: 0.036m³/Carton
DISPOSAL: Discarded expired products shall be handled in accordance with the relevant policies of the local environmental protection department.
CERTIFICATE: CCS/EC
The RSYD-A2 water activated lifejacket light is an emergency position indicators. Power is lithium battery and LED as light source. It can be fixed on a variety of life jackets to indicate the location of the person who drop into water. When the water flow switch of the lifejacket light touches water, light will turn on automatically and flash continuously, indicate the location of the person who drop into water to improve the success rate of rescue. The light also has a manual close button allows it to be turned off manually.
The product has the advantages of small volume, light weight, long illumination time,good stability,and easy to install etc.
PRODUCT PERFORMANCE PARAMETER
There were no signs of damage after ten cycles at -30℃ and +65℃ ambient temperature, such as shrinkage, cracking, swelling, decomposition or changes in mechanical properties. It can be used normally at an ambient temperature of -30℃ to +65℃.
PRODUCT TECHNICAL STANDARD
SOLAS 1974 and Amendments, Chapter III, Articles 4, 7, 22, 26, 32 and 34, MSC.48(66) amended by MSC.207(81)), LSA Chapters I and II, MSC.81(70) amended by MSC.200(80), MSC.226(82), and MSC.323(89), part 1, section 10.
OPERATION
When the water flow switch of the lifejacket light touches water,light will turn on automatically and flashes 50-70 times/min.
MAINTENANCE
(1) Do not touch the switch with hands or other wet objects during storage to avoid accidental activation,air humidity and water vapor will not activate the light.Don't worry about the light activate accidentally so as long as it is stored properly.
(2) Check whether the appearance of the light is damaged,if there is a feature affects its function, it should be judged if a new product need to be replaced.
(3) Immerse the light into water,it should turn on automatically.Light should be closed normally by pressing the manual switch.After test, please also dry the water flow switch,and light will not turn on by pressing the manual switch.If the water flow switch does not be dried,light will still turn on.Please dry it in this case.Test qualified,the water activated lifejacket light is regard as in a valid normal state.
VALIDITY: 5 years
PACKING SPECIFICATION: 200pcs/Carton Volume: 0.036m³/Carton
DISPOSAL: Discarded expired products shall be handled in accordance with the relevant policies of the local environmental protection department.
CERTIFICATE: CCS/EC
To install this Web App in your iPhone/iPad press 
and then Add to Home Screen.
