True
Product Image

Pharos Marine APCL‐5 Flashchanger

115,550,000 ₫ 115,550,000 ₫
0% Off

Pharos Marine APCL‐5 Flashchanger

1 https://marinesafety.vn/web/image/product.template/3307/image_1920?unique=a9d4b36
(0 review)
Days
:
Hours
:
Mins
:
Secs

    Sự kết hợp này không tồn tại.

    SKU:
    N/A

    • 30-day money-back
    • 7-day returns
    • Shipping: 2-3 Days

    Pharos Marine Automatic Power's microprocessor‐based unit packs a wide array of capabilities into one compact, lightweight and highly reliable package. Occupying the space of a typical lampchanger, this unit can be placed in virtually every optic of 140mm diameter or larger. It frees up the space in the base of most lanterns (normally occupied by a typical flasher) for housing power supplies, batteries, time dependent operation boards, battery chargers, monitoring or control electronics, radios, etc.

    Features

    Wide array of advanced capabilities:


    • Field selection of a combination of flash rhythms, voltage regulation points, and/or communications addresses.
    • Pulse‐width modulated voltage regulation system.
    • Photocell Daylight Control
    • Synchronization Terminal and Lampout Flag and Secondary Optic Control Terminal
    • Solar Charge Regulation and Blocking Diode
    • Electrical and Optical Monitoring of Lamp
    • Manual Switch or Radio Actuated Field Self‐Test Routine

    Several environmental protection enhancements:

    • Gold contacts coated with corrosion inhibitor
    • Double painted circuit boards
    • Auxiliary motor cover
    • Shafts coated with high temperature lithium grease


    Unit operates normally after immersion in a 4‐day high‐temperature salt fog test 256 Flash Characters, Field Selectable

    Pulse Width Modulation

    Automatic Day/Night Control

    Optional RS‐232/RS‐485 Communications

    Lampchanging:

    4‐place or 6‐place unit with microprocessor‐controlled stepper motor, accurate to fractions of millimeters, provides virtually shock‐free lamp replacement; if all lamps have failed, automatic lamp recheck and autorotation limit after each photocell transition

    Low Voltage Disconnect (Optional):

    Unit may be programmed with a low voltage disconnect to prevent complete discharge of the battery

    Serviceability:

    Large, screw‐type, nickel‐alloy plated, brass terminals for solar panel, battery, photocell, synchronization, and control/ alarm/ monitor output


    SPECIFICATIONS APCL‐5 Flashchanger


    Input Voltage: 5‐30 VDC; Reverse Polarity Protected
     Output Voltage:

    Pulse Width Modulated Regulated for Voltages 0.2 Volts

    Above Regulation Point; 2% accuracy.Unregulated

    Output Tracking Minus 0.20 Volts Below Input for Input

    Voltage Less Than 0.2 Volts Above Regulation Point

     Output Current:   6 Amps (Max.)
     Idle Current:   4.5mA
     Power Consumption:  5mA Flash Or Idle ‐ Day and/or Night
     Synchronization: 

    Terminal Provided to Allow Flashing of Multiple Lamps in

    Unison Via Hardwire or Uniflash® III Wireless

    Synchronization System

     Operating Temperature:  ‐40C to +70C
     Daylight Control:

    Resistance set at 1700 ohms (on);

    1200 ohms (off); Adjustable

     Solar Charge Regulator: 

    10 Amp solar charge regulator prevents overcharge;


    Blocking diode also provided


    To install this Web App in your iPhone/iPad press and then Add to Home Screen.